Yellow 1 1/2" x 100' Forestry Hose (Alum NH Couplings) - USA Made

Skip to product information
1 of 15
Regular price Price: $247.04
Regular price $0.00 Sale price $247.04
Sale Sold out

Stock Level: 10 or more

Product Status: In Stock

When Will it Ship:

Shipping Cost: Free Shipping

Shipping Transit Time: 2 to 3 Business Days

Eligible for Express Shipping: Yes

Stock Level Updated: Dec 5, 2024


Item Number: 15F6100YL
Weight: 18.5 lb
  • Made In USA
  • Hose Size: 1 1/2 inches (Inside Diameter)
  • Hose Length: 100 feet (Approximately)
  • Male Coupling: Aluminum 1 1/2 inch NH / NST
  • Swivel Female Coupling: Aluminum 1 1/2 inch NH / NST
  • The Female Coupling will only Connect to a Male 1 1/2 inch NH / NST
  • Compatible Nozzle: 1 1/2 inch NH / NST only
  • Hose Type: Polyester Single Jacket (Mildew Resistant)
  • Color: Yellow
  • Liner: EPDM Rubber
  • Approximate Width Laying Flat: 2 1/2 inches
  • Service Pressure: 300 PSI
  • Proof Test Pressure: 600 PSI
  • Burst Test Pressure: 900 PSI
View full details

Collapsible content

Description

All of our domestic hoses are supplied by the largest manufacturer of fire hose in the United States. They have specialized in forestry hoses for the past 35 years. Every assembled hose is pressure tested by the manufacturer to ensure safety and reliability. Hoses are produced to meet or exceed NFPA standards used by United States Forestry Service (USFS).

Our 1 1/2 inch Made in the USA yellow forestry fire hose is manufactured to meet and exceed all performance requirements of NFPA 1961 and USDA-US Forestry Service Specification 5100-187 Type 2. Jacket construction shall be a 1-2 woven twill pattern with the 2 over-crossing on the exterior of the jacket. This wildland fire hose jacket is sealed with a polyurethane based polymer impregnation for abrasion and mildew resistance and requires no drying. Meets FSS 450 WP 187 Type II per USDA / USFS 5100-187c specification.

  • NSN: 4210-01-526-2977
  • NFES: 0933

Applications

  • Forest firefighting
  • Brush firefighting
  • Wildland firefighting
  • Residential Use

Test Ratings (Water Only With Expansion Ring Couplings)

  • Service Pressure (A 3-minute hydrostatic test conducted by users on in-service hose to determine suitability for continued service)
  • Proof Test Pressure (A pressure equal to a least two times the service test pressure)
  • PSI Burst Test Pressure

 

Specifications

1 1/2" Hose Male Couplings

  • Inside diameter of a male coupling: 1 1/2 inches
  • Outside diameter of a male NH / NST coupling: 2 inches (1.99) - 9 Threads per inch
  • Outside diameter a male NPSH or NPT coupling: 1 7/8 inches (1.87) - 11.5 Threads per inch

Forestry Type II Spec Sheet

Help Me Connect

NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread but NST or NH is more common these days. NH = NST.

  • The female side of a NH / NST coupling will only connect to a male NH / NST connection
  • The male side of a NH / NST coupling will only connect to a female NH / NST connection

NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings.

  • The female side of a NPSH coupling will only connect to a male NPT pipe or a male NPSH connection
  • The male side of a NPSH coupling will only connect to a female NPSH connection
  • It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.

Warranty Information

Limited 5-Year Warranty

We will replace any fire hose with manufacturer defects in material and workmanship. All warranty claims must be returned to us for inspection before we determine a solution.

Our warranty does not cover gaskets, shipping cost, cosmetic damages, normal wear-and-tear, improper use or chemical damage.

Fire hoses purchased for use at Fire Training Facilities will have a 90-day Manufacturer Defect warranty only.

Upon receipt of the returned goods, hoses will be subject to inspection and testing.

Should it be determined that the hose is covered by warranty, it will be repaired or replaced.

Related Products